Archive for the ‘SNMP’ tag

Enabling SNMP support in Amavisd-new  

Posted at 10:13 pm in Uncategorized

If there’s a short and sweet installation document for enabling SNMP support in Amavisd-new, I seem to have failed searching for it today. Instead I made my own, partially for documenting my own setup and partially for the benefit of others.

This brief installation document assumes you’re running a Ubuntu or Debian system. It will also assume that your Amavisd-new service is installed and running as one should expect.

First, install the programs and its dependencies. The Amavisd-new SNMP subagent metrics are available through the regular Net-SNMP software suite. Note: The /etc/default/amavisd-snmp-subagent file says it needs libnet-snmp-perl, but it will also require the libsnmp-perl package.

# apt-get install libnet-snmp-perl libsnmp-perl snmp-mibs-downloader snmp snmpd

 

Then, download all the MIBs you’ll need (and a few more). Due to distribution restrictions Debian-based systems provide a separate downloader which will save the MIBs to where they should be.

# download-mibs

Downloading documents and extracting MIB files.
This will take some minutes.
[...]

 

When the download process has completed, allow the snmp server and the snmp agent to locate and use the MIBs by commenting out or removing the appropriate lines (in italic) in /etc/default/snmpd and /etc/snmp/snmp.conf respectively:

File: /etc/default/snmpd

# This file controls the activity of snmpd

# Don't load any MIBs by default.
# You might comment this lines once you have the MIBs downloaded.
# export MIBS=

 

and

File: /etc/snmp/snmp.conf

# As the snmp packages come without MIB files due to license reasons, loading
# of MIBs is disabled by default. If you added the MIBs you can reenable
# loading them by commenting out the following line.
# mibs :

 

For MIB support for the Amavisd-new metrics (yes you want this), download the AMAVIS-MIB file into the directory /usr/share/snmp/mibs/:

# wget https://amavis.org/AMAVIS-MIB.txt -O /usr/share/snmp/mibs/AMAVIS-MIB.txt

 

Enable the Amavisd-new SNMP agent by configuring its default setting file:

File: /etc/default/amavisd-snmp-subagent

# To enable the amavis-snmp-subagent set ENABLED to yes

ENABLED="yes"

 

The Amavisd-new SNMP subagent will register a couple of OIDs with SNMPd using the AgentX protocol. Below is parts of the output from a debug run, indicating which OIDs it will register with SNMPd.

NET-SNMP version 5.7.3 AgentX subagent connected
registering root OID 1.3.6.1.4.1.15312.2.1.1 for am.snmp
registering root OID 1.3.6.1.4.1.15312.2.1.2 for am.nanny
registering root OID 1.3.6.1.4.1.15312.2.1.3.1.1 for pf.maildrop
registering root OID 1.3.6.1.4.1.15312.2.1.3.1.2 for pf.incoming
registering root OID 1.3.6.1.4.1.15312.2.1.3.1.3 for pf.active
registering root OID 1.3.6.1.4.1.15312.2.1.3.1.4 for pf.deferred

 

So we will need to tell SNMPd that these should be available. We do that by adding the following line, with an OID base covering all of the above, to /etc/snmp/snmpd.conf:

view systemonly included .1.3.6.1.4.1.15312.2.1

 

Finally, (re)start all the services involved.

# service snmpd restart
# service amavis restart
# service amavisd-snmp-subagent restart

 

After a short while you should be able to read Amavis statistics over SNMP!

# snmpwalk -m +AMAVIS-MIB -c public -v2c 127.0.0.1 1.3.6.1.4.1.15312.2.1
[...]
AMAVIS-MIB::inMsgs.0 = Counter32: 41
AMAVIS-MIB::inMsgsOpenRelay.0 = Counter32: 41
AMAVIS-MIB::inMsgsStatusAccepted.0 = Counter32: 35
AMAVIS-MIB::inMsgsStatusRejected.0 = Counter32: 6
AMAVIS-MIB::inMsgsSize.0 = Counter64: 456221
AMAVIS-MIB::inMsgsSizeOpenRelay.0 = Counter64: 456221
AMAVIS-MIB::inMsgsRecips.0 = Counter32: 41
AMAVIS-MIB::inMsgsRecipsOpenRelay.0 = Counter32: 41
AMAVIS-MIB::inMsgsBounce.0 = Counter32: 9
AMAVIS-MIB::inMsgsBounceNullRPath.0 = Counter32: 2
AMAVIS-MIB::inMsgsBounceUnverifiable.0 = Counter32: 9
AMAVIS-MIB::outMsgs.0 = Counter32: 15
AMAVIS-MIB::outMsgsSubmit.0 = Counter32: 15
AMAVIS-MIB::outMsgsSubmitQuar.0 = Counter32: 9
AMAVIS-MIB::outMsgsSubmitNotif.0 = Counter32: 6
AMAVIS-MIB::outMsgsProtoLocal.0 = Counter32: 9
AMAVIS-MIB::outMsgsProtoLocalSubmit.0 = Counter32: 9
AMAVIS-MIB::outMsgsProtoSMTP.0 = Counter32: 6
AMAVIS-MIB::outMsgsProtoSMTPSubmit.0 = Counter32: 6
AMAVIS-MIB::outMsgsDelivers.0 = Counter32: 15
AMAVIS-MIB::outMsgsSize.0 = Counter64: 87735
AMAVIS-MIB::outMsgsSizeSubmit.0 = Counter64: 87735
AMAVIS-MIB::outMsgsSizeSubmitQuar.0 = Counter64: 87729
AMAVIS-MIB::outMsgsSizeSubmitNotif.0 = Counter64: 6
AMAVIS-MIB::outMsgsSizeProtoLocal.0 = Counter64: 87729
AMAVIS-MIB::outMsgsSizeProtoLocalSubmit.0 = Counter64: 87729
AMAVIS-MIB::outMsgsSizeProtoSMTP.0 = Counter64: 6
AMAVIS-MIB::outMsgsSizeProtoSMTPSubmit.0 = Counter64: 6
AMAVIS-MIB::quarMsgs.0 = Counter32: 9
AMAVIS-MIB::quarBadHdrMsgs.0 = Counter32: 3
AMAVIS-MIB::quarSpamMsgs.0 = Counter32: 6
AMAVIS-MIB::quarMsgsSize.0 = Counter64: 87729
AMAVIS-MIB::quarBadHdrMsgsSize.0 = Counter64: 8273
AMAVIS-MIB::quarSpamMsgsSize.0 = Counter64: 79456
AMAVIS-MIB::contentCleanMsgs.0 = Counter32: 32
AMAVIS-MIB::contentCleanMsgsOpenRelay.0 = Counter32: 32
AMAVIS-MIB::contentBadHdrMsgs.0 = Counter32: 3
AMAVIS-MIB::contentBadHdrMsgsOpenRelay.0 = Counter32: 3
AMAVIS-MIB::contentSpamMsgs.0 = Counter32: 6
AMAVIS-MIB::contentSpamMsgsOpenRelay.0 = Counter32: 6
AMAVIS-MIB::outConnNew.0 = Counter32: 6
[...]

 

You should now be able to throw different kinds of monitoring software on Amavisd-new.

 

Written by bjorn on January 22nd, 2017

Tagged with , , ,